5.4 P3 Group V/F Control Parameters
5.4 P3 Group V/F Control Parameters
ℹ️
Inverter Parameter Attribute Explanation
✅: Indicates that the setting value of this parameter can be changed when the inverter is in both stopped and running states;
✳️: Indicates that the setting value of this parameter cannot be changed when the inverter is in a running state;
❎: Indicates that the value of this parameter is the actual measured value and cannot be changed.
Group P3: V/F Control Parameters
| Function Code | Name | Setting Range | Factory Value | Attribute | DEC Address |
|---|---|---|---|---|---|
| P3-00 | V/F Curve Setting | 1: G-type2: P-type | 1 | ✳️ | 62208 |
| P3-01 | Torque Boost | 1: G-type2: P-type | 1 | ✅ | 62209 |
| P3-02 | Torque Boost Cutoff Frequency | 1: G-type2: P-type | 1 | ✳️ | 62210 |
| P3-03 | Multi-point VF Frequency Point 1 | 1: G-type2: P-type | 1 | ✳️ | 62211 |
| P3-04 | Multi-point VF Voltage Point 1 | 1: G-type2: P-type | 1 | ✳️ | 62212 |
| P3-05 | Multi-point VF Frequency Point 2 | 1: G-type2: P-type | 1 | ✳️ | 62213 |
| P3-06 | Multi-point VF Voltage Point 2 | 1: G-type2: P-type | 1 | ✳️ | 62214 |
| P3-07 | Multi-point VF Frequency Point 3 | 1: G-type2: P-type | 1 | ✳️ | 62215 |
| P3-08 | Multi-point VF Voltage Point 3 | 1: G-type2: P-type | 1 | ✳️ | 62216 |
| P3-09 | VF Deviation Compensation Gain | 1: G-type2: P-type | 1 | ✅ | 62217 |
| P3-10 | VF Over Excitation Gain | 1: G-type2: P-type | 1 | ✅ | 62218 |
| P3-11 | VF Oscillation Suppression Gain | 1: G-type2: P-type | 1 | ✅ | 62219 |
Explore these documents to learn more.