5.13 Pc Group Multi-segment Speed Instructions and Simple PLC

✅: Indicates that the setting value of this parameter can be changed when the inverter is in both stop and running states;
✳️: Indicates that the setting value of this parameter cannot be changed when the inverter is in a running state;
❎: Indicates that the value of this parameter is an actual detection record value and cannot be changed.

Pc Group: Multi-segment Speed Instructions and Simple PLC

Function Code	Name	Setting Range	Factory Value	Attribute	DEC Address
Pc-00	Multi-segment Instruction 0	-100.0%~100.0%	0.0%	✅	64512
Pc-01	Multi-segment Instruction 1	-100.0%~100.0%	0.0%	✅	64513
Pc-02	Multi-segment Instruction 2	-100.0%~100.0%	0.0%	✅	64514
Pc-03	Multi-segment Instruction 3	-100.0%~100.0%	0.0%	✅	64515
Pc-04	Multi-segment Instruction 4	-100.0%~100.0%	0.0%	✅	64516
Pc-05	Multi-segment Instruction 5	-100.0%~100.0%	0.0%	✅	64517
Pc-06	Multi-segment Instruction 6	-100.0%~100.0%	0.0%	✅	64518
Pc-07	Multi-segment Instruction 7	-100.0%~100.0%	0.0%	✅	64519
Pc-16	Simple PLC Operating Mode	0: Stop after Single Run 1: Maintain Final Value after Single Run 2: Continuous Loop	0	✅	64528
Pc-17	Simple PLC Power-off Memory Selection	Units: Power-off Memory Selection 0: No Power-off Memory 1: Power-off Memory Tens: Stop Memory Selection 0: No Stop Memory 1: Stop Memory	00	✅	64529
Pc-18	Simple PLC-0 Segment Running Time	0.0s(h)~6553.5s(h)	0.0s(h)	✅	64530
Pc-19	Simple PLC-0 Segment Acceleration/Deceleration Time Selection	0~3	0	✅	64531
Pc-20	Simple PLC-1 Segment Running Time	0.0s(h)~6553.5s(h)	0.0s(h)	✅	64532
Pc-21	Simple PLC-1 Segment Acceleration/Deceleration Time Selection	0~3	0	✅	64533
Pc-22	Simple PLC-2 Segment Running Time	0.0s(h)~6553.5s(h)	0.0s(h)	✅	64534
Pc-23	Simple PLC-2 Segment Acceleration/Deceleration Time Selection	0~3	0	✅	64535
Pc-24	Simple PLC-3 Segment Running Time	0.0s(h)~6553.5s(h)	0.0s(h)	✅	64536
Pc-25	Simple PLC-3 Segment Acceleration/Deceleration Time Selection	0~3	0	✅	64537
Pc-26	Simple PLC-4 Segment Running Time	0.0s(h)~6553.5s(h)	0.0s(h)	✅	64538
Pc-27	Simple PLC-4 Segment Acceleration/Deceleration Time Selection	0~3	0	✅	64539
Pc-28	Simple PLC-5 Segment Running Time	0.0s(h)~6553.5s(h)	0.0s(h)	✅	64540
Pc-29	Simple PLC-5 Segment Acceleration/Deceleration Time Selection	0~3	0	✅	64541
Pc-30	Simple PLC-6 Segment Running Time	0.0s(h)~6553.5s(h)	0.0s(h)	✅	64542
Pc-31	Simple PLC-6 Segment Acceleration/Deceleration Time Selection	0~3	0	✅	64543
Pc-32	Simple PLC-7 Segment Running Time	0.0s(h)~6553.5s(h)	0.0s(h)	✅	64544
Pc-33	Simple PLC-7 Segment Acceleration/Deceleration Time Selection	0~3	0	✅	64545
Pc-50	Simple PLC Running Time Unit	0: s (seconds) 1: h (hours)	0	✅	64562
Pc-51	Multi-segment Instruction 0 Setting Mode	0: Set by Function Code PC-00 1: AI1 2: AI2 3: AI3 External Keyboard Potentiometer 4: HDI Input Pulse 5: PID 6: Preset Frequency (P0-08) Setting, UP/DOWN Can Be Modified	0	✅	64563

Explore these documents to learn more.